 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NJU7018 LOW-VOLTAGE OPERATION DUAL C-MOS OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJU7018 is a low voltage single-power-supply and low operating current dual C-MOS operational amplifier. The input bias current is as low as less than 1pA consequently the very small signal around the ground level can be amplified. The minimum operating voltage is 1V and the output stage permits output signals to swing between both of the supply rails. Furthermore, the NJU7018 is packaged with a various small one therefore it can be especially applied to portable items. PACKAGE OUTLINE NJU7018D NJU7018M NJU7018V NJU7018R NJU7018RB1 FEATURES Single-Power-Supply Wide Operating Voltage ( VDD=1~5.5V ) Wide Output Swing Range ( VOM=2.9V min. @ 3.0V ) Low Operating Current ( IDD=0.75mA typ./circuit ) Low Bias Current ( IIB=1pA typ. ) Internal Compensation Capacitor C-MOS Technology Package Outline DIP8,DMP8,SSOP8,VSP8,TVSP8 EQUIVALENT CIRCUIT PIN CONFIGURATION Ver.2003-03-18 -1- NJU7018 ABSOLUTE MAXIMUM RATINGS ( Ta=25C ) PARAMETER Supply Voltage Differential Input Voltage Common Mode Input Voltage Power Dissipation Operating Temperature Range Storage Temperature Range SYMBOL VIN VID VIC PD Topr Tstg RATINGS 7 7 ( note1 ) -0.3~7 ( DIP8 ) 500 ( DMP8 ) 300 ( SSOP8 ) 250 ( TVSP8 ) 320 -40~+85 -55~+125 UNIT V V V mW C C ( note1 ) If the supply voltage ( VDD ) is less than 7V, the input voltage must not over the VDD level though 7V is limit specified. ( note2 ) Decoupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. ELECTRICAL CHARACTERISTICS ( Ta=25C,VDD=3.0V,RL= ) PARAMETER Input Offset Voltage Input Offset Current Input Bias Current Input Impedance Large Signal Voltage Gain Input Common Mode Voltage Range Maximum Output Swing Voltage Common Mode Rejection Ratio Supply Voltage Rejection Ratio Operating Current Slew Rate Unity Gain Bandwidth SYMBOL VIO IIO IIB RIN AVD VICM VOM1 VOM2 CMR SVR IDD SR Ft TEST CONDITION VIN=1/2VDD MIN. 60 0~2.5 VDD-0.1 55 60 TYP. 1 1 1 70 65 70 0.75 3.7 1.0 MAX. 10 VSS+0.1 1.5 UNIT mV pA pA T dB V V V dB dB mA V/s MHz RL=16k RL=16k VIN=1/2VDD VDD=1.5~5.5V Per Circuit AV=40dB,CL=10pF ( note3 ) The source current is less than 181A ( at VOM/RL=2.9V/16k ). -2- Ver.2003-03-18 NJU7018 TYPICAL CHARACTERISTICS Ver.2003-03-18 -3- NJU7018 [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -4- Ver.2003-03-18 |
Price & Availability of NJU7018
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |